Peugeot 308 Key Fob Problems and How to Fix Them
If your Peugeot 308 key fob has stopped working for a while it could be due to a dead battery in the coin or water damage or receiver module issues, or a malfunctioning electronic chip. Fortunately, these issues are easy to fix and you'll be able to get your car back to normal in no time at all!
Car keys can also be damaged due to the blade getting worn. You can easily fix this issue by visiting your local Car Key Man Auto Locksmith to have a new blade fitted.
Battery
The key fob in your Peugeot 308 may die or become weak enough to not send a powerful signal. The key fob could cease to function and stop you from locking or unlocking your doors or even starting the engine. You'll need a replacement battery for your key fob to fix this.
You can buy a brand new battery at an auto parts store, or at your local hardware store. When you purchase the battery, make sure that it's brand new and hasn't sat on the shelf for a long time. A brand new battery has more capacity and will send a stronger signal your vehicle.
After replacing peugeot car key cover , try unlocking the doors and locking them with the key fob. If the doors do not unlock, it's likely that the receiver module in the car is the culprit. The local Peugeot dealer can reprogram the receiver module.
It's also possible that the chip inside your key fob is damaged. This can happen if you drop your key fob on the ground or expose it to water. The rubber seals that shield the chip from moisture may become worn down over time especially if your key fob is exposed to water for lengthy period of time, like when you submerge it in the ocean at the beach. To prevent this from happening you must keep your key fob free of water and out of water.
Water Damage
Don't lose hope on your key fob if it gets wet, regardless of whether you dropped it in an aquisition or stumbled into a pool. While the key fob has rubber seals which should shield it from water, prolonged exposure to water may cause damage to its electronic chip. Since water is an excellent conductor and conductor, any water that is able to get inside the key fob could cause a chain of short circuits that will eventually damage the chip. After removing the battery clean its contacts with isopropyl alcohol, and dry it completely before putting it back in.
Your Peugeot 308 may not start because of an unresponsive battery. Jumper cables are a fantastic method of restarting the engine if you own an additional car. If the battery is damaged it is required to replace it.
A poor receiver in the car may also block it from receiving the signal from the keyfob. It could be due to a issue with the antenna, or wiring, or the key fob might be damaged. It may be necessary to program a new fob into your vehicle if using one. If you are unable solve the issue, contact an expert technician. A technician who is trained in the field will be able determine the issue quickly and fix the issue immediately.
Radio Interference
Interference can cause problems such as a key fob that isn't recognized or has a narrow range. The interference can be radiated or transmitted, the latter being caused by power and speaker cables getting too close to electrical components. In general, rerouting cables and moving them away from these components will resolve the issue.
It's unlikely that someone is watching the signals from your key fob to steal your car, but it's possible that your signal has been muffled by radio frequency interference. This is a simple problem to repair.
If you're experiencing a problem with your key fob not being recognized, try an entirely new battery. Also, ensure that the battery you are using is the right type and size. Batteries that aren't the correct size could damage your battery.
Certain alarm systems from the aftermarket and radar detectors operate on the same radio frequency as your key fob, and could cause them to interfere with your key signals. Avoid attaching these devices to your key fob.
Pairing Issues
A car's remote keyless entry system has an antenna that receives radio frequency signals from the key fob. It is not possible to start your vehicle if the receiver isn't working even if your key fob is in good working order and is reprogrammable. This issue can be caused in a number of ways, including a dead battery in the coin-cell, or water damage. The receiver may also be malfunctioning due to a software glitch or internal damage to the key.
The battery that powers your Peugeot 308 keyfob has likely failed. It is possible to replace it by using a fresh battery, but it is important to get the right battery for your key fob. The wrong battery could lead to further problems with the key fob, so it is recommended to use either the original battery or an alternative that is similar in size, voltage and specifications.
Your Peugeot 308 keyfob may not function if paired with a different vehicle. This could be the case if you have given your key fob to someone else or if the key has been used to unlock or start other vehicles. This can be solved by reprogramming your key fob with an OBDII scan. This tool will ask for details about your car including its VIN or engine type. It is essential that you enter the correct details.